Perforator PB85V

The Perforator PB85V is able to install clay, concrete, GRP or steel pipes to to 100m in length. The compact design enables the auger boring to be installed from a thrust pit of only 2.1m diameters, for a 1m long 225mm pipe and 2.4 or 2.7 for the 600mm dia pipes.

more detailed information - perforator pb85v

The hydraulic rig generates a maximum force of 85 tons from four hydraulic jacks working at an operational pressure of 200 bar, torque is 18000Nm. The diamensions of the machine bed are 2095m long x 1.180m wide x 1.550m overall height. Adjustable screws enable the rig to be set up to level and gradient and there is a clearance to the concrete base to allow removal of a muck skip.

The systems use a hallow rod pilot steered by a theodolite aligned to a CCTV screen for guidance, the operator can see the inclination of the head and has a recording of any steering necessary.

If you wish to discuss your requirements further please contact A E Yates Head Office

Perforator PB85V guided auger boring rigPerforator PB85vV Guided Auger Rig new to our fleet

By using this site you are consenting to our use of cookies

Menu