Bohrtec BM400 LSC

A E Yates Trenchless Solutions Ltd have 2No Bohrtec BM400 guided auger machines which enables us to lay pipes up to 900mm OD from a minimum 4m diameter shaft or pit (depending on pipe length). This machine will push over 100m of pipe using its 200t jacking capacity.


It uses a conventional pilot tube for guidance which it follows with a steel casing incorporating a cutting head and auger flights which return the cuttings back to the drive pit. Once the cutter head arrives at the reception shaft the product pipe is attached to the rear of the steel casing. The product pipe is then jacked forward that simultaneously displaces the cutter head, steel casings and augers which are removed from the reception pit until the full span of product pipes are installed.

The BM400 rig and ancillary equipment is also used to power the Bohrtec front steer machine. For further detailed information a manual can be downloaded.

If you wish to discuss your requirements further please contact A E Yates Head Office

Borhtec BM400 LSCBohrtec BM400 LSC

By using this site you are consenting to our use of cookies