600mmID Iseki Unclemole

This is A E Yates Trenchless Solutions Ltd smallest slurry TBM. It is a full slurry system with its own compact jacking rig and with 3inch slurry lines and charge and discharge pumps and even an interdischarge pump for longer runs. It has the classic Unclemole crushing system and will crush cobbles up to 200mm and 150Mpa. Obviously at this size bentoniting (other than from the head) and interjacks are not possible but the machine is capable of drives up to about 120m depending on conditions.

It is ideal as an alternative to a guided auger when conditions are too wet to auger. The system is fully sealed and the head of water it can work in is only limited by the pumps used. With its compact jacking rig the 600mm Iseki Unclemole will operate from a 2.7m dia shaft or more usually from a 3m caisson with 2m pipes.

If you wish to discuss your requirements further please contact A E Yates Head Office

Iseki 600mm ID Unclemole

By using this site you are consenting to our use of cookies

Menu